Fuji 100% New And OriginalNP1L-LL2 Module

Description

Your Fuji Spraygun has been adjusted at the factory and is ready for spraying. To clean out any impurities that may have accumulated during assembly or shipping, we recommend spraying a small quantity of clean paint thinner through the gun. Before tackling any serious spraying, experiment with the gun on a scrap piece of wood or cardboard until you become familiar with all the controls.

Turn the air nozzle until it clicks into the horizontal position. This setting produces a vertical pattern useful for spraying from side to side. Set the nozzle in a vertical position. This setting produces a horizontal pattern, useful for spraying up and down. Now try setting the nozzle at a 45º angle. This setting produces a round pattern useful for spraying thinner objects. Remember to turn down the amount of paint when you switch to a smaller round pattern, otherwise you will find that there will be too much paint concentrated in one spot. To test, try turning the fluid adjusting screw (part. 2019) clockwise until you cannot pull the trigger. Then unscrew it a little until a small amount of paint material comes out of the jet when you depress the trigger. This results in a small circular pattern. If you continue to depress the trigger and move along your workpiece you will get a fine line. From 6” away this will give you a pattern about 1” - 2” in diameter.

This would be handy for spraying thin spindles in a chair for instance. Then place the nozzle to where it almost touches the test board and the pattern becomes extremely small - similar to an airbrush. Try writing your name with the gun. If you get runs then you will have to adjust the fluid adjusting screw again at the back of the gun. This type of technique is handy for repairs and touch-up. To obtain more coverage with a fuller spray, unscrew the fluid adjusting screw. Experimenting like this enables you to become familiar with your Fuji spraygun.

More Products

You May Like

Hello, Do You Interested In PLC,DCS?

We are the supplier for industrial automation spare parts.

We specialize in PLC module, DCS card pieces, ESD system card pieces, vibration monitoring system card pieces, steam turbine control system module, gas generator spare parts.

We have large of inventory for our company's advantage products: YOKOGAWA , AB, ABB, GE, BENTLY NEVADA, EMERSON, HONEYWELL, FOXBORO, TRICONEX. etc.

Grateful for your valuable time. If you have any requirements, please send me an inquiry.

*Direct purchase from abroad, genuine products, preferential prices, after-sales warranty, complete models, and advantageous inventory.

*All spare parts have a warranty period of 1 year and are professionally tested and certified.

*If you need to order more than 1 product, please contact us and we can provide you with a discount.

*If you find that other suppliers offer lower prices for the same products, we are also willing to provide you with further discounts based on their prices.

*If you have any other questions, please feel free to contact us.

*Please let us know if you have any needs for spare parts, and we can provide you with further assistance. We are waiting for your inquiries.

*Same product, different price and service.

*Your choice is our driving force.

Main business: PLC and DCS system spare parts modules of world-renowned brands, superior supply, sufficient inventory

Foxboro: I/A Series system, FBM full series (field input/output module)

Sequential control, ladder logic control, accident recall processing, digital-to-analog conversion, input/output signal processing,

Data communication and processing, etc.

Westinghouse: 1C31 series DCS system, CPU, OVATION system, WDPF system,

WEStation system spare parts.

Triconex: Redundant fault-tolerant control system, modern fault-tolerant controller based on triple modular redundancy (TMR) structure.

EMERSON: Modules, cards, drives and other spare parts.

XYCOM: XVME series

Bently: 3500/3300 system.

Rockwell: ICS system.

ABB: PM full range DCS system, IGCT high voltage inverter series, industrial robot spare parts DSQC series, INFI 90, etc.

Bailey: BRC series DCS system, etc.

Allen-Bradley: 1756, 1785, 1771, 1746 full range system, etc.

Yokogawa: CP series, etc.

Honeywell: TK/TC/CC systems, etc.

Reliance: 57C series, etc.

Schneider: 140 series processors, control cards, power modules, etc.

Modicon: AS series PLC system spare parts.

Siemens: 6ES5/6ES7414/6ES7415/6ES7416 series PLC system spare parts,

Siemens MOORE, Siemens Simatic C1, Siemens CNC system, etc.

Motorola: MVME 162, MVME 167, MVME1772, MVME177, etc.

XYCOM: I/O, VME board and processor, etc.

GE: IC698/IC697 full range of PLC systems, modules, cards, drivers and other spare parts.

Yaskawa: servo controller, servo motor, servo driver.

Bosch Rexroth: Indramat, I/O modules, PLC controller, drive module, etc.

Woodward: SPC valve position controller, PEAK150 digital controller.