Brand New Module Fuji NP1L-DN1 In Stock

Description

Follow the viscosity guide chart. You will eventually learn to thin the material by experience. Traditionally, lacquers were thinned 50/50 even for high pressure spraying but this much thinning is not neccessary. However, coatings manufacturers are reformulating constantly so it is always advisable to check with them. Thinning a product excessively causes more overspray as well as runs. Stringent air quality controls in some geographic locations may prohibit reducing by more than 30%. Remember, when you buy a can of paint, lacquer, polyurethane, varnish etc. over the counter, it will be formulated for brushing. That means, it will be too viscous (thick) and will require thinning to spray successfully.

When spraying with a conventional system, it is estimated that up to 90% of what you spray evaporates, mists and floats about in the surrounding air. Most conventional compressor type systems atomize the material at 45 - 60 PSI with very low CFM. Please keep in mind that this is a generalization - there are many variables. The Fuji Turbine System atomizes the material with a constant high volume of air flow. Unrestricted, turbines produce 100 CFM at low pressures (5 - 8 PSI).

The low pressure allows the material being sprayed to be laid on gently and not blasted on. Lower velocity translates to less bounce-back and less overspray. Don’t forget that once you have adjusted the viscosity and size of the spray pattern, you must then adjust how much paint flows through the gun. Then you should try reducing the air pressure at the air control valve to reduce bounceback and overspray.

More Products

You May Like

Hello, Do You Interested In PLC,DCS?

We are the supplier for industrial automation spare parts.

We specialize in PLC module, DCS card pieces, ESD system card pieces, vibration monitoring system card pieces, steam turbine control system module, gas generator spare parts.

We have large of inventory for our company's advantage products: YOKOGAWA , AB, ABB, GE, BENTLY NEVADA, EMERSON, HONEYWELL, FOXBORO, TRICONEX. etc.

Grateful for your valuable time. If you have any requirements, please send me an inquiry.

*Direct purchase from abroad, genuine products, preferential prices, after-sales warranty, complete models, and advantageous inventory.

*All spare parts have a warranty period of 1 year and are professionally tested and certified.

*If you need to order more than 1 product, please contact us and we can provide you with a discount.

*If you find that other suppliers offer lower prices for the same products, we are also willing to provide you with further discounts based on their prices.

*If you have any other questions, please feel free to contact us.

*Please let us know if you have any needs for spare parts, and we can provide you with further assistance. We are waiting for your inquiries.

*Same product, different price and service.

*Your choice is our driving force.

Main business: PLC and DCS system spare parts modules of world-renowned brands, superior supply, sufficient inventory

Foxboro: I/A Series system, FBM full series (field input/output module)

Sequential control, ladder logic control, accident recall processing, digital-to-analog conversion, input/output signal processing,

Data communication and processing, etc.

Westinghouse: 1C31 series DCS system, CPU, OVATION system, WDPF system,

WEStation system spare parts.

Triconex: Redundant fault-tolerant control system, modern fault-tolerant controller based on triple modular redundancy (TMR) structure.

EMERSON: Modules, cards, drives and other spare parts.

XYCOM: XVME series

Bently: 3500/3300 system.

Rockwell: ICS system.

ABB: PM full range DCS system, IGCT high voltage inverter series, industrial robot spare parts DSQC series, INFI 90, etc.

Bailey: BRC series DCS system, etc.

Allen-Bradley: 1756, 1785, 1771, 1746 full range system, etc.

Yokogawa: CP series, etc.

Honeywell: TK/TC/CC systems, etc.

Reliance: 57C series, etc.

Schneider: 140 series processors, control cards, power modules, etc.

Modicon: AS series PLC system spare parts.

Siemens: 6ES5/6ES7414/6ES7415/6ES7416 series PLC system spare parts,

Siemens MOORE, Siemens Simatic C1, Siemens CNC system, etc.

Motorola: MVME 162, MVME 167, MVME1772, MVME177, etc.

XYCOM: I/O, VME board and processor, etc.

GE: IC698/IC697 full range of PLC systems, modules, cards, drivers and other spare parts.

Yaskawa: servo controller, servo motor, servo driver.

Bosch Rexroth: Indramat, I/O modules, PLC controller, drive module, etc.

Woodward: SPC valve position controller, PEAK150 digital controller.