Fuji NC1S-2100% New And Original Module In Box

Description

Like other spraygun manufacturers, we use ‘stock’ stainless steel rod for the needle. This rod can differ in diameter slightly with each run. This means that when you change say, a #3 for a #4 needle. One could be slightly oversized diameter and one slightly undersized. This neccessitates adjusting the needle seal. The needle seal bushing (packing) must be tight enough to prevent any leakage of paint material into the gun. It should however, allow the needle to glide smoothly through it. If this bushing is too loose often a ‘pulsating’ of the spray pattern will be seen.

Insert the needle seal adjusting tool (with teeth pointing downwards) over the needle. This is the tubular-shaped tool that comes with the complete Fuji system. Locate the slots in the needle seal nut and tighten the needle seal while continually pulling the trigger. (If the slots are clogged with paint, use a sharp screwdriver to clean out the slots). Once the needle is grabbed by the seal, back off the screw a very slight amount. The needle seal is adjusted perfectly just short of the point where the needle sticks. Another guide is to grasp the end of the needle and shake it firmly but gently from side to side - there should be no play - but the needle should still slide smoothly without sticking when the trigger is pulled. The needle seal should never need replacing.

Fuji Products

You May Like

Advantage Products

1.Allen-Bradley 1756/1769/1771/1785 Series

2.ABB 800xA/Bailey INFI90/DSQC Series

3.Bently Nevada 3500/3300 Monitoring System

4.Schneider Series Quantum 140 series

5.General Electric IC693/IC697/IC698/IS200/DS200 Series

6.SIEMENS MOORE/S5 Series

7.Westinghouse: OVATION/WDPF/MAX1000 system spare parts

8.Invensys Triconex: Redundant fault-tolerant control system, Most modern fault-tolerant controller based on Triple Modular Redundancy (TMR) architecture

9.Honeywell TDC2000/TDC3000/Experion HS Series

10.YOKOGAWA CS3000 System

*Direct purchase from abroad, genuine products, preferential prices, after-sales warranty, complete models, and advantageous inventory.

*All spare parts have a warranty period of 1 year and are professionally tested and certified.

*If you need to order more than 1 product, please contact us and we can provide you with a discount.

*If you find that other suppliers offer lower prices for the same products, we are also willing to provide you with further discounts based on their prices.

*If you have any other questions, please feel free to contact us.

*Please let us know if you have any needs for spare parts, and we can provide you with further assistance. We are waiting for your inquiries.

*Same product, different price and service.

*Your choice is our driving force.

Main business: PLC and DCS system spare parts modules of world-renowned brands, superior supply, sufficient inventory

Foxboro: I/A Series system, FBM full series (field input/output module)

Sequential control, ladder logic control, accident recall processing, digital-to-analog conversion, input/output signal processing,

Data communication and processing, etc.

Westinghouse: 1C31 series DCS system, CPU, OVATION system, WDPF system,

WEStation system spare parts.

Triconex: Redundant fault-tolerant control system, modern fault-tolerant controller based on triple modular redundancy (TMR) structure.

EMERSON: Modules, cards, drives and other spare parts.

XYCOM: XVME series

Bently: 3500/3300 system.

Rockwell: ICS system.

ABB: PM full range DCS system, IGCT high voltage inverter series, industrial robot spare parts DSQC series, INFI 90, etc.

Bailey: BRC series DCS system, etc.

Allen-Bradley: 1756, 1785, 1771, 1746 full range system, etc.

Yokogawa: CP series, etc.

Honeywell: TK/TC/CC systems, etc.

Reliance: 57C series, etc.

Schneider: 140 series processors, control cards, power modules, etc.

Modicon: AS series PLC system spare parts.

Siemens: 6ES5/6ES7414/6ES7415/6ES7416 series PLC system spare parts,

Siemens MOORE, Siemens Simatic C1, Siemens CNC system, etc.

Motorola: MVME 162, MVME 167, MVME1772, MVME177, etc.

XYCOM: I/O, VME board and processor, etc.

GE: IC698/IC697 full range of PLC systems, modules, cards, drivers and other spare parts.

Yaskawa: servo controller, servo motor, servo driver.

Bosch Rexroth: Indramat, I/O modules, PLC controller, drive module, etc.

Woodward: SPC valve position controller, PEAK150 digital controller.